AnaJet mP5i User Manual

Service Manual
Version 1.1
User Manual
Copyright © 2014 Anajet LLC

AnaJet mP5i Specifications

General

Brand	AnaJet
Model	mP5i
Category	Printer
Language	English

Summary

Anajet mPower Adjustments

2.1 Carriage Belt Tension

Procedure for adjusting the carriage belt tension on the Anajet mPower printer.

2.2 Table Belt Tension

Procedure for adjusting the table belt tension on the Anajet mPower printer.

2.3 Table Motor Belt Tension Adjustment

Steps to adjust the table motor belt tension on the Anajet mPower printer.

2.4 Carriage Encoder Adjustment

Procedure for adjusting the carriage encoder alignment on the Anajet mPower printer.

2.5 Wiper Height Adjustment

Procedure for adjusting the wiper blade height on the Anajet mPower printer.

2.6 Table Z Axis Motor Limit Flag Adjustment

Procedure for adjusting the table Z axis motor limit flag on the Anajet mPower printer.

2.7 Obstruction Laser Sensor Adjustment

Procedure for adjusting the obstruction laser sensor on the Anajet mPower printer.

2.8.1 Linear Guide Rail - Table

Procedure for lubricating the linear guide rails for the table on the Anajet mPower printer.

2.8.2 Linear Guide Rail - Carriage

Procedure for lubricating the linear guide rails for the carriage on the Anajet mPower printer.

Anajet mPower Parts Replacement

3.1 Damper Replacement

Procedure for replacing the ink dampers on the Anajet mPower printer.

3.2 Ink supply tube replacement

Procedure for replacing ink supply tubes on the Anajet mPower printer.

3.2.1 Removing Ink tubees

Steps to remove the ink supply tubes from the Anajet mPower printer.

3.2.2 Replacing Ink tube system

Procedure for replacing the entire ink tube system in the Anajet mPower printer.

3.3 Maintenance Station Replacement

Procedure for replacing the maintenance station on the Anajet mPower printer.

3.3.1 Maintenance Station Pump Replacement

Procedure for replacing the maintenance station pump on the Anajet mPower printer.

3.3.2 Maintenance Station Wiper Assembly Replacement

Procedure for replacing the maintenance station wiper assembly on the Anajet mPower printer.

3.4 Ricoh Gen 4 Print Head Controller Replacement

Procedure for replacing the Ricoh Gen 4 print head controller board.

3.5 Print head Replacement

Procedure for replacing the print head on the Anajet mPower printer.

3.6 Ricoh Carriage Controller Board Replacement

Procedure for replacing the Ricoh carriage controller board on the Anajet mPower printer.

3.7 Ink Bay Assemblies

Procedures related to the ink bay assemblies of the Anajet mPower printer.

3.7.1 Needle Plate-Pin Shift Assembly Replacement

Procedure for replacing the needle plate-pin shift assembly (chip reader).

Anajet Contact Block Replacement

Procedure for replacing the contact block on the Anajet mPower cartridge reader.

3.7.2 Ink Needle Replacement (CMYK)

Procedure for replacing CMYK ink needles on the Anajet mPower printer.

Anajet White Ink Needle Valve Replacement

Procedure for replacing white ink needle valves on the Anajet mPower printer.

3.8 Ink Slot Controller Board Replacement

Procedure for replacing the ink slot controller board on the Anajet mPower printer.

3.9 USB-ETH-CAN Switch Board Replacement

Procedure for replacing the USB-ETH-CAN switch board on the Anajet mPower printer.

3.10 Table Motion Control Board Replacement

Procedure for replacing the table motion control board on the Anajet mPower printer.

3.11 Carriage Motion Control Board Replacement

Procedure for replacing the carriage motion control board on the Anajet mPower printer.

3.12 Power Supply Replacement

Procedure for replacing the power supply unit on the Anajet mPower printer.

3.13 Control Panel Assembly Replacement

Procedure for replacing the control panel assembly on the Anajet mPower printer.

3.13.1 Control Panel O-MAP Board Replacement

Procedure for replacing the control panel O-MAP board on the Anajet mPower printer.

3.13.2 Control Panel I-O Board Replacement

Procedure for replacing the control panel I-O board on the Anajet mPower printer.

3.13.3 Replacing LCD Screen

Procedure for replacing the LCD screen on the Anajet mPower printer.

3.14 Button Assembly Replacement

Procedure for replacing the button assembly on the Anajet mPower printer.