To Next Page
K
kathleenbryantSep 1, 2025
Why my Animo OptiBean Touch Coffee Maker does not respond?
- LLisa KeithSep 1, 2025
If your Animo Coffee Maker isn't responding, it might be in stand-by mode. Try switching off the stand-by mode.
Why my Animo OptiBean Touch Coffee Maker does not respond?
If your Animo Coffee Maker isn't responding, it might be in stand-by mode. Try switching off the stand-by mode.
What to do for E27 NTC SHORT CIRCUIT error on Animo OptiBean Touch Coffee Maker?
If your Animo Coffee Maker displays an E27 NTC SHORT CIRCUIT error, it indicates that the temperature sensor is measuring a temperature higher than 125 °C or has a short circuit. Allow the boiler to cool down first. Check if the dry-boil protection was triggered, and then check the NTC sensor, wiring, and connection.
What to do if my Animo Coffee Maker shows E13 Mixer group error?
If your Animo Coffee Maker displays an E13 Mixer group error, it indicates that the brewer and mixer group are overloaded. Clean the mixer rotor and then switch the machine off and on again.
What causes E23 INLET VALVE ERROR on Animo OptiBean Touch Coffee Maker?
If your Animo Coffee Maker displays an E23 INLET VALVE ERROR, it means the flow meter registers water flow while the inlet valve is electrically closed. Try switching the machine off and on again and check the operation of the inlet valve.
How do I fix the E24 BREWER ERROR on my Animo Coffee Maker?
If your Animo Coffee Maker displays an E24 BREWER ERROR, it means the brewer switches do not arrive in the correct position during the brewing process. Check whether the brewer is properly positioned in the motor unit and check the brewer switches for correct operation in the service menu 2.07 Hardware test.
How do I fix E30 BREWER REACH BREW TIMEOUT on my Animo OptiBean Touch?
If your Animo Coffee Maker displays an E30 BREWER REACH BREW TIMEOUT error, it means the brewer has left the starting position but did not reach the brewer position. Check if the brewer motor runs and if the brewer unit is blocked.
What to do if my Animo Coffee Maker shows E5 Brewer error?
If your Animo Coffee Maker displays an E5 Brewer error during start-up, try switching the machine off and on again.
What to do if my Animo Coffee Maker shows E7 Brewer motor error?
If your Animo Coffee Maker displays an E7 Brewer motor error, it means the brewer motor is either overloaded or stuck. Remove the brewer from the machine, clean it, and then reinstall it correctly. You can also use the brush to clean the brewer. After doing this, switch the machine off and on again.
Why my Animo Coffee Maker does not work?
If your Animo Coffee Maker isn't working, there could be a few reasons. Check the fuses to see if they are broken. Ensure the machine is switched on. Also, inspect the power cable for any damage.
What to do if my Animo OptiBean Touch Coffee Maker has a bad product taste?
If your Animo Coffee Maker is producing a bad product taste, consider these possible causes and solutions: * The canister might be empty: Fill the canister. * The canister might be incorrectly positioned: Position the canister correctly. * The outlet of the canister might be blocked: Clean the outlet of the canister. * The distributor of the canister might not be working: Check or clean the distributor of the canister. * Wrong ingredient: Use the correct ingredient. * The ingredient is solidified (caked): Replace the ingredient.
User manual provides information about installation, operation and maintenance for safe and effective use.
Explains the meaning of warning, caution, and note symbols used in the manual for hazard identification.
Instructions and warnings regarding modifications or alterations to the machine.
General guidelines for safe operation, maintenance, and use of approved parts.
Precautions for safe installation, including environmental conditions and power connection.
Safety measures for operating the machine, keeping controls clean, and unplugging when not in use.
Safety steps for maintenance, including protective gloves and avoiding water jets.
Specifies age, training, and supervision requirements for operating the machine safely.
Emphasizes maintaining high hygiene standards for drinks intended for consumption.
Lists technical specifications for the machine's dimensions, weight, pressure, and temperatures.
Details electrical specifications including voltage, frequency, power, and fuse rating.
Overview of the configuration menu structure and navigation.
General installation guidelines, including water softening and temperature considerations.
Guidelines for placing the machine on a flat surface, considering clearance for doors and canisters.
Steps for connecting the machine to a tap and optional filter system.
Step-by-step guide for initial machine operation and beverage dispensing.
Process for selecting a beverage and dispensing it into a cup.
Steps to dispense beverages into jugs, including PIN entry and quantity settings.
Instructions for unlocking, filling, and securing the bean canister.
Steps for removing, filling, and reinserting instant canisters.
Lists approved cleaning products for the mixer and brewer.
Guide to performing the cleaning program, including adding cleaning product.
Detailed steps for disassembling, cleaning, and reassembling the mixer.
Instructions for cleaning the bean canister and the grinder.
Procedure for cleaning the instant canisters and their parts.
Steps to remove, clean, and reassemble the machine's outlet.
Lists error codes (E3, E5, etc.) and their possible causes and corrections.
Explains common display messages, their causes, and required actions.
Lists common malfunctions, their causes, and corrective actions.
General| Product Type | Coffee Maker |
|---|---|
| Brand | Animo |
| Model | OptiBean Touch |
| Display | Touchscreen |
| Programmable | Yes |
| Keep Warm Function | Yes |
| Auto Shut-off | Yes |
| Voltage | 230 V |
| Water Filter | Yes |
