APRILIA TUONO V4 R a-PRC ABS User Manual

Flywheel cover installation
•
Insert the centring dowels in the cover.
•
Apply a layer of sealing paste along the
external edge of the cover.
•
Insert the cover together with the sta-
tor.
Recommended products
Three bond Sealing paste
-
•
Turn the five screws (1) and the two
screws (2).
•
Tighten the screws working in stages
and diagonally.
•
Insert the Blow-by system pipe and
fasten it with a new clamp.
TUONO V4 R a-PRC ABS Engine
ENG - 277

APRILIA TUONO V4 R a-PRC ABS Specifications

General

Brand	APRILIA
Model	TUONO V4 R a-PRC ABS
Category	Motorcycle
Language	English