APRILIA TUONO V4 R a-PRC ABS User Manual

•
Remove the wheel hub fastening nut.
•
Retrieve the sealing washer.
•
Loosen the screws on the wheel axle
clamps.
•
Tap the wheel axle slightly with a rub-
ber mallet so that the hole on the op-
posite side is exposed.
•
Remove the wheel axle by inserting a
screwdriver in the holes on the pin.
•
Support the wheel while extracting the
pin, and then remove it.
Checking the front wheel
FRONT WHEEL BEARINGS
Check the bearings installed on the wheel.
TUONO V4 R a-PRC ABS Suspensions
SUSP - 393

APRILIA TUONO V4 R a-PRC ABS Specifications

General

Brand	APRILIA
Model	TUONO V4 R a-PRC ABS
Category	Motorcycle
Language	English