APRILIA TUONO V4 R a-PRC ABS User Manual

•
Add 4,1 l (0.90 UK gal) of new engine
oil of the specified type.
•
Screw on the filler cap.
•
Warm up the engine up by running it for
a few minutes, then switch it off. After
thirty seconds, check the level in the
sight glass. Top up if necessary.
CAUTION
THE OIL LEVEL MUST NEVER DROP BELOW THE MINI-
MUM MARKING OR EXCEED THE MAXIMUM MARKING;
AN OIL LEVEL NOT WITHIN THE MINIMUM AND MAXIMUM
MARKINGS MAY CAUSE SEVERE ENGINE DAMAGE
Engine oil filter
Replace the engine oil filter each time you
change the engine oil.
•
Drain the engine oil completely.
•
Unscrew and remove the engine oil fil-
ter from its seat.
NOTE
NEVER REUSE AN OLD FILTER.
•
Spread a thin layer of oil on the sealing ring of the new engine oil filter.
•
Insert and screw the new engine oil filter in the seat, filling the filter to 1/3 of its capacity with
engine oil before fitting.
See also
Replacement
Air filter
•
Remove the fuel tank.
•
Unscrew and remove the eight air filter
box cover screws
TUONO V4 R a-PRC ABS Maintenance
MAIN - 65

APRILIA TUONO V4 R a-PRC ABS Specifications

General

Brand	APRILIA
Model	TUONO V4 R a-PRC ABS
Category	Motorcycle
Language	English