•
Disconnect the upper injector fuel de-
livery union.
See also
Fuel tank
•
Disconnect the variable geometry in-
take system connector.
•
Fit a suitably sized shim behind the fil-
ter box cover.
•
Lift the filter box cover on which the
control unit is installed.
•
Do not rotate the cover excessively to
avoid straining the pipes and cables.
•
Plug the intake duct opening with clean
paper
•
Unscrew and remove the three air filter
screws.
•
Remove the filter and replace it with a
new component of the same type.
Maintenance TUONO V4 R a-PRC ABS
MAIN - 66