APRILIA TUONO V4 R a-PRC ABS User Manual

functionality of the timing system may be compromised if the washer is bent or incorrectly
positioned.
THIS WASHER CANNOT BE INSTALLED ON THE CHAIN TENSIONER OF ONE CYLINDER BANK
ALONE - ALWAYS INSTALL WASHERS ON BOTH CHAIN TENSIONERS.
•
Place a new gasket between the crank-
case and the head.
•
Place the two dowel pins.
•
Install the head.
•
Pretighten the six nuts on the stud bolts
proceeding in the following order: 1 - 2
- 3 - 4 - 5 - 6.
•
Then tighten them fully following the
same order.
Engine TUONO V4 R a-PRC ABS
ENG - 308

APRILIA TUONO V4 R a-PRC ABS Specifications

General

Brand	APRILIA
Model	TUONO V4 R a-PRC ABS
Category	Motorcycle
Language	English