Chapter 3: Configuration and commissioning
24 1X-X3 Installation Manual
User levels
For your safety, access to some features of this product are restricted by user
levels. The access privileges of each user level are described below.
The configuration tasks described in this chapter can only be performed by an
installer user level, either basic or advanced. These user levels are reserved for
the installation contractors authorized and responsible for the system installation
and configuration.
Public user
The public user level is the default user level.
This level allows basic operating tasks, such as responding to fire alarms,
extinguishing events, or fault warnings at the control panel. No password is
required.
Operator user
The operator user level allows additional operating tasks that command the
system or perform maintenance functions. It is reserved for authorized users who
have been trained to operate the control panel.
Consult the operation manual for more details on the functions available for
public user and operator user levels.
Basic installer user
The basic installer user level allows the quick configuration of basic installation
options that cover most applications.
Advanced installer user
The advanced installer user level allows the detailed configuration of very
specific applications where the advanced features provided by the control panel
are required. This level is also required for installers that require minor
customizations after configuring a basic installation.
Passwords and indications for each user level are described in “User level
passwords and indications” below.
User level passwords and indications
The default user level passwords and the corresponding LED and seven-
segment display indications are shown in Table 7 on page 25. The seven-
segment display is only visible when the control panel cover is removed. Figure 1
on page 4 shows the location of the seven-segment LED (item 1).
To Next Page
Loading...
Need help?
General
