1X-X3 Installation Manual 3
Chapter 2
Installation
Summary
This chapter explains how to install your control panel, how to connect zones, fire
and extinguishing system devices, and the power supply.
Note: This product must be installed and maintained by qualified personnel
adhering to the CEN/TS 54-14 standard (or the corresponding national standard)
and any other applicable regulations.
Content
Control panel cabinet layout 4
Cabinet installation 5
Preparing the cabinet 5
Where to install the cabinet 5
Fixing the cabinet to the wall 5
Connections 7
Recommended cables 7
Connecting zones with initiating devices 7
Connecting inputs 10
Connecting outputs 14
Connecting the mains power supply 16
Connecting the batteries 18
Connecting other equipment 18
To Next Page
Loading...
Need help?
General
