Chapter 1: Introduction
2 1X-X3 Installation Manual
Product description
The 1X-X3 control panel provides three fire detection zones (Z1, Z2, and Z3) and
several manual call point (MCP) and control inputs that control the extinguishing
actions for a single extinguishing area.
If a fire detection zone is not configured as part of the extinguishing detection
area, the control panel provides standard fire panel functionality for that fire
detection zone. For example, the panel activates fire sounders, fire routing, and
other auxiliary outputs.
Consult your system installer for configuration details about the fire zones that
have been assigned to the fire extinguishing area or (optionally) to fire detection
zones.
Product compatibility
Products compatible with this control panel are listed in the supplied compatibility
list. Compatibility with products that are not listed in that document cannot be
guaranteed.
For further details contact your local supplier.
To Next Page
Loading...
Need help?
General
