Chapter 3: Configuration and commissioning
26 1X-X3 Installation Manual
Figure 14: Front panel configuration controls
Button Function
1 Scroll to the next configuration menu on the seven-segment display.
2 Scroll to the next configuration value for the active menu on the seven-segment
display.
3 Scroll to the previous configuration menu on the seven-segment display.
4 Scroll to the previous configuration value for the active menu on the seven-segment
display.
Enter Confirm a menu selection or a value selection entry.
Note: The configuration controls are also used to enter the user level password.
The seven-segment display
The seven-segment display is only visible when the control panel cover is
removed (see Figure 1 on page 4).
Figure 15: The seven-segment display
1. Mode LED
2. Value LED
Table 8: Mode and value LEDs
LED Indications
Mode Select a configuration menu using buttons 1 and 3 when this LED is steady, or
Select a configuration submenu using buttons 1 and 3 when this LED is flashing.
Value Select a configuration value using buttons 2 and 4 when this LED is steady
To Next Page
Loading...
