Arlo Go 2 User Manual

70Troubleshooting
Arlo Go 2 LTE/WiFi Security Camera
User Manual
Check the rules for armed modes
Check the rules in your modes. Make sure that push notication is enabled in the mode you’re
using.
1. Open the Arlo app.
2. Tap the Mode button.
3. Select your camera.
A list of modes displays.
4. Tap Edit
next to Armed.
5. Tap Edit
next to the rule.
6. Under Alert, make sure that the Push Notication check box is selected.
7. If you made changes, tap Save.
Check the Arlo app notication settings on an iOS device
Make sure that you allow the Arlo app to receive push notications. The Arlo app push
notications can be disabled on iOS and Android devices.
1. Tap the Settings icon for your iOS device.
2. Tap Notications > Arlo.
3. Make sure that Allow Notication is selected.
Check the Arlo app notication settings on an Android device
Make sure that you allow the Arlo app to receive push notications. The Arlo app push
notications can be disabled on iOS and Android devices.
1. Tap the Settings icon for your Android device.
2. Tap Application Manager > Arlo.
3. Make sure that the Show Notications setting is selected.

Arlo Go 2 Specifications

General

Type	IP security camera
Built-in light	Yes
Placement supported	Outdoor
Connectivity technology	Wireless
Maximum operating distance	91 m
Form factor	Bullet
Mounting type	Ceiling/wall
Product color	White
Country of origin	China
Ethernet LAN	No
Mobile network generation	4G
Field of view (FOV) angle	130 °
Detection distance	7 m
Alert notification type	E-mail, Push notification
LED type	IR
Infra-red wavelength	850 nm
Night vision distance	7.62 m
Number of illumination LEDs	2
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Number of cameras	1
Digital zoom	12 x
Power source type	Battery
Operating temperature (T-T)	-20 - 45 °C
Sensor type	-
Harmonized System (HS) code	8525890000

Weight and Dimensions

Depth	120 mm
Width	64.2 mm
Height	86 mm
Weight	490 g
Package depth	179 mm
Package width	161 mm
Package height	115 mm
Package weight	792 g