Introduction
ARM DDI 0363G Copyright © 2006-2011 ARM Limited. All rights reserved. 1-7
ID073015 Non-Confidential
BTCM No BTCM ports - Build and pin
One BTCM port (B0TCM) No error checking
Parity error checking
32-bit ECC error checking
64-bit ECC error checking
Build and pin
a
4KB, 8KB, 16KB, 32KB, 64KB,
128KB, 256KB, 512KB, 1MB, 2MB,
4MB, or 8MB
Pin
Two BTCM ports (B0TCM
and B1TCM)
No error checking
Parity error checking
32-bit ECC error checking
64-bit ECC error checking
Build
2x2KB, 2x4KB, 2x8KB, 2x16KB,
2x32KB, 2x64KB, 2x128KB,
2x256KB, 2x512KB, 2x1MB, 2x2MB,
or 2x4MB
Pin
Interleaved on 64-bit granularity in
memory
Adjacent in memory
Pin
Instruction
endianness
Little-endian - Build
Pin-configured Little-endian
Big-endian
Pin
Floating point
(VFP)
No FPU - Build
FPU included
b
-
MPU No MPU - Build
MPU included 8 MPU regions
12 MPU regions
Build
TCM bus parity No TCM address and control
bus parity
- Build
TCM address and control
bus parity generated
-
AXI bus parity No AXI bus parity - Build
AXI bus parity generated/
checked
-
Breakpoints 2-8 breakpoint register pairs - Build
Watchpoints 1-8 watchpoint registers - Build
ATCM at reset Disabled - Pin
Enabled
c
Base address
0x0
Base address configured
Build and pin
Table 1-1 Configurable options (continued)
Feature Options Sub-options
Build-configuration
or pin-configuration
To Next Page
Loading...
