Product Description
DualWave Arthroscopy Pump User’s Guide
DFU-0212 Rev. 1 Page 8 of 54
The AR-6480 includes:
• A universal medical-grade switching power supply that allows the pump to
function automatically at voltage ranges found worldwide.
• An automatic universal Shaver Detect feature that allows the device to
automatically switch from low cannula suction to high flow shaver suction on
demand. There is a touch panel display for user inputs.
• A Lavage function to provide elevated pressure to stop bleeding and a Rinse
function to clear joint spaces quickly.
The user-defined settings for inflow pressure and outflow rates are adjustable
through controls located on the touch panel screen or on the remote control.
There are four Applied Part pump tubing options for the AR-6480:
1. One-piece tubing only.
This tubing, when used alone, must be replaced after each patient.
2. One-piece tubing and extension tubing combination.
The AR-6410 can be reused for an entire surgical day, while the AR-
6220 must be replaced after each patient.
3. Two-piece tubing combination.
The pump tubing can be reused for an entire surgical day. The patient
tubing must be replaced after each surgical procedure.
4. Outflow tubing.
When the Outflow Tubing Set is attached to the AR-6480, the DualWave
Arthroscopy Pump changes from an inflow-only pump to an
inflow/outflow fluid management system.
The optional Y-Adapter Tubing is intended to be used with all inflow Arthrex
tubing sets/system combinations to connect up to four irrigation bags.
The AR-6480 can be used as an inflow-only irrigation pump or, with the outflow
tubing attached; it can be used as an inflow/outflow fluid management system.
Other optional accessories:
• Remote control
• Foot pedal
• Shaver Detect cord
• Synergy integration cable
To Next Page
Loading...
Need help?
General
