Product Description
DualWave Arthroscopy Pump User’s Guide
DFU-0212 Rev. 1 Page 19 of 54
2
2
.
.
5
5
.
.
8
8
Patient Extension Tubing System (AR-6425: Region B)
The Patient Extension Tubing System is used in conjunction with the Main
Pump Tubing Set (AR-6420/AR-6420CL) to allow the Main Pump Tubing
Set to be used for an entire surgical day, while replacing only the Patient
Extension Tubing System after each individual surgery. The backflow
check valve built into the Patient Extension Tubing System prevents
contaminated fluid from back-flowing into the Main Pump Tubing Set,
maintaining a closed sterile fluid environment during tubing
replacements.
2
2
.
.
5
5
.
.
9
9
Outflow Pump Tubing Set (AR-6430)
The Outflow Pump Tubing is intended to be used with all the Arthrex
tubing sets while in inflow/outflow mode to provide precisely-controlled
outflow from the shaver and a cannula (optional) to multiple waste
consumption devices. When the Outflow Tubing Set is attached to the AR-
6480, the DualWave Arthroscopy Pump changes from an inflow-only
pump to an inflow/outflow fluid management system.
2
2
.
.
5
5
.
.
1
1
0
0
Outflow Tub set with ReDeuce Tubing System
(AR-6435: Region A)
A combination tube set with both outflow tubing (AR-6430) and ReDeuce
Patient Tubing (AR-6421) is packaged together in one tray. For customers
who are currently purchasing both the AR-6430 and the AR-6421, the AR-
6435 will save preparation time by reducing the number of fluid
management items that have to be opened prior to surgery.
2
2
.
.
5
5
.
.
1
1
1
1
Y-Adapter Tubing (AR-6215)
The optional Y-Adapter Tubing is intended to be used with all inflow
Arthrex tubing sets/system combinations to connect up to four irrigation
bags.
For more details on which tubing configurations are available in each area, contact
your Arthrex representative.
To Next Page
Loading...
Need help?
General
