ASCOM D62 Configuration Manual

TD 92639EN
08 December 2012 / Ver. H
Configuration Manual
Ascom d62 DECT Handset
14
4.6 Replacement Procedure Choice Guide
Depending on situation, two different replacement procedures can be chosen; replacement
via PDM/Device Manager and Easy Replacement. Use the following list as a guide to choose
which procedure to use.
• If a handset needs to be replaced due to for exam
ple a broken display, see the User
Manual for Ascom d62 DECT Handset.
• If the electrical connection is damaged, it might not b
e possible to follow the Easy
Replacement procedure. Depending on fault, it might work to do a replacement via PDM/
Device Manager, see 4.7 Replacement of Handset with the Device Manager on
page 14 or
4.8 Handset Replacement with PDM on
page 15.
• If two handsets and their settings shall be switched between two users, follow 4.7
Replacement of Handset with the Device Manager on
page 14 or 4.8 Handset
Replacement with PDM on
page 15.
4.7 Replacement of Handset with the Device Manager
Both the old handset and the new handset must be of the same device type, that is, d62.
The same extension number is assigned to the new handset.
Make sure that the old handset is saved in the Device Manager. Start the Device Manager
and na
vigate to the "Numbers" tab. There shall be a tick in the "Saved" column for the old
handset.
If the handset is not saved, insert it into a desktop charger or
rack charger connected to
Device Manager and perform a save. For additional information, see the Installation and
Operation Manual for the Unite module being used.
If it would be impossible to sa
ve the old handset settings, stop this replacement procedure.
Instead unsubscribe the old handset from the PBX, register the new handset and follow the
instructions for installing a handset, see 3.2 Installing a New Handset on
page 8.
When the handset is saved, unsubscribe the old handset from the PBX.
The following steps are described in two different
scenarios, check which one suits the best
before proceeding.
4.7.1 Data Included in a Replacement Transfer
The following data is replaced during a re
placement with Device Manager:
• User parameters (including User ID)
• Contacts (entered by the user)
Note that the following data is not replaced:
•DECT registration
• Call list
• Messages
• Bluetooth pairing list
• Company phonebook
• Downloaded Language
•Licenses
1
1. A handset’s product license (for example, d62 Messenger) and feature license(s) can be moved using the Move license
function in the Device Manager.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English