ASCOM D62 Configuration Manual

TD 92639EN
08 December 2012 / Ver. H
Configuration Manual
Ascom d62 DECT Handset
21
5.5.1 Create Local Phonebook File
The local phonebook file is created by an Excel file
provided by your supplier.
5.5.2 Upload a Local Phonebook File
IMPORTANT: When uploading a local phonebook file, l
ocal phonebook entries (if any) in the
handset will be replaced by the entries in the file.
1 In PDM or the Device Manager, go to the Numbers tab and select h
andset(s).
2In the Number m
enu, select Import contacts > From file.
3 Select the file to be imported and click "Open".
5.6 Call Services
Call services is a configurable menu in the handset. The purpose of the Call services menu is
to provide a user friendly access to system dependent functionality such as absence
handling and call diversion.
The menu is described in User Manual, Ascom d62 DECT Handset, TD 92477GB.
Besides the default Call services functions, it is possib
le to define 10 extra system specific
call services by codes. The codes can be programmed with digits 0-9, #, *, P – pause, H –
hook (auto disconnection), U – the handset prompts for user input with the possibility to
enter numerical characters (procedure call).
The programming of the menu is done with PDM. see Installation and Operation Manual,
Portable Device Manager (PDM), Windows Version, TD 92325EN.
Using the PDM and the "Edit template" featur
e, the parameter can be found at
Systems > Common > Call Services > General Service X
Tip: Your supplier m
ay have a template example that will configure the call services menu
for the PBX.
5.6.1 Activate/Deactivate Call Servic
es when Changing Profile
It is possible to activate/deactivate a Call service when changing p
rofile in the handset. This
feature can for example be used to send feature access codes (for example *21*) to the
system when the handset changing profile.
1 If needed, configure the Call services to be used for the profiles, re
spectively. See 5.6
Call Services.
2 Select User Profiles > User Profile X (w
here X represents 1 - 4).
3 Select Presence and diversi
on > Call services.
4In the Whe
n activated and When deactivated drop lists, select the Call services to be
used when the profile is activated and deactivated.
TIP: It is possible to activate a profile when placing a handset in a charger, see 5.15.1 In
Charger Action when not in Call on
page 27.
5.7 Call Diversion
It is possible to configure user friendly call diversion menus in the handset using PDM/
Device Manager. These menus can then be selected in the handset by selecting Calls > Call
services > Divert calls.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English