ASCOM D62 Configuration Manual

TD 92639EN
08 December 2012 / Ver. H
Configuration Manual
Ascom d62 DECT Handset
18
5 Handset Configuration
5.1 Configure a Handset Using a Template
It is possible to select a handset in the PDM and directly change one or more configuration
parameters. By using a template, the same configuration can easily be applied to many
handsets simultaneously. Templates are also an efficient way to give good control over
which changes that are applied to each handset.
Templates enables configuration of all aspects o
f a handset from sound volume to keypad
shortcuts.
Your supplier can provide example templates for di
fferent PBX:s. The handset will have full
functionality towards the PBX even without such a template. By using such a template,
though, the handset will be customized for that PBX with menu options for PBX specific
functions such as Callback.
A template can be created (see 5.1.1 Create a Template) and/or imported (see Installation
and Operation Manual, Portable Device Manager (PDM), Windows Version, TD 92325EN ).
5.1.1 Create a Template
1 Open the PDM the Device Manager.
2 Select the Templates tab and open the me
nu "Template > New...". The Create
Template window is opened.
3 Select the device d62 and parameter version tha
t matches the software version
installed on the handset. Give the template a descriptive name.
The parameters that are not part of the tem
plate will be left unchanged on the
handset.
The parameter version of an installed handse
t is visible under the "Numbers" tab or
the "Devices" tab.
4 Select the checkbox of each parameter that you want to b
e part of this template and
enter the proper value.
5 Click "OK" to save your template.
5.1.2 Apply a Template
1 Open the PDM or the Device Manager
2 Open the Numbers tab and select the handsets you want to apply the template to.
3 Make a right-click and select "Run template...".
Only templates with a paramet
ers version matching the selected handsets will be
shown. Select the template you want to apply and click "OK".
4 The template is applied. The number of parameters in the template will affect the
tim
e it takes to apply the template to the selected handsets.
When looking at a handset under the Num
bers tab, the column "Last run template"
will show the name of the most recently applied template.
Tip: It is also possible to apply a template on several
handsets of the same device type
(d62) simultaneously using the Baseline function in the Device Manager. See Installation
and Operation Manual, IMS3, TD 92762EN

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English