ASCOM D62 Configuration Manual

TD 92639EN
08 December 2012 / Ver. H
Configuration Manual
Ascom d62 DECT Handset
46
5.34 Display Management Layout
In the Active area of the display, the first 2 rows can show 12 characters each (default). It is
possible to extend the number of rows/characters to be displayed in idle mode/during a call
up to 3 rows with 16 characters each. When extending the rows/characters, the System
name or Owner ID will be hidden in order to allocate space for system dependent
information instead.
NOTE: All settings except the default setting require an IP-DECT system with software
ver
sion 5.0.x or higher.
1 Select System X.
2In the Display Management Layout drop-d
own list, select one of the following:
• 2x12 characters
• 2x16 characters
• 3x16 characters, remove Owner ID
• 3x16 characters, remove system name
5.35 Owner identification in the Idle Display
It is possible to add owner identification in standby mode of the handset. In a template or
Number in PDM/Device Manager, the parameter is found at:
Settings > Owner ID
Note: The Owner ID might not b
e displayed depending on the setting in 5.34 Display
Management Layout.
Tip: It is also possible to configure the
Owner ID via the handset menu. See User Manual,
Ascom d62 DECT Handset, TD 92477GB.
5.36 Profiles
5.36.1 User Profiles
It is possible to set up an own p
rofile for incoming calls, message alerts, message volume,
vibrating alerts, key sound etc. This can be useful when there are many users on the same
handset, and they want different sound profiles. It can also be used for temporarily settings,
for example while in a meeting, incoming calls should be silent.
1 Select User Profiles > User Profile X (where X represents 1 - 4).
2In the Name text field, enter the
name of the profile.
The name will be visible in the handset and will also be a sele
ctable option in User
Profiles > Active Profile.
3 Select the settings to be edited. For exampl
e Sound and alerts, Soft keys etc.
4 If wanted, select the profile to be activated in th
e handset by selecting User Profiles >
Active Profile.
Tip: It is also possible to configure profiles via the h
andset menu. See User Manual, Ascom
d62 DECT Handset, TD 92477GB.
5.36.2 System Profiles
Note: This feat
ure is applicable for d62 Messenger and d62 Protector only.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English