ASCOM D62 Configuration Manual

TD 92639EN
08 December 2012 / Ver. H
Configuration Manual
Ascom d62 DECT Handset
23
4 Select "Lunch", "Meeting", "Trip", "Vacation", "Out" and/or "General absence X"; enter
the following:
• Activation code - the system specific code for an
absence reason, for example
"0*".
• Name - enter name of absence reason (only for General
absence). The name will
be visible in handset.
• User input - specifies if time or date is required for the absence reason (only for
General absen
ce).
5.9 In Call Menu
In Call Menu is a configurable menu in the handset. The purpose of the In Call Menu is to
provide a user friendly access to system dependent functionality during a call such as:
• Start a new call during a conversation
• Switch between calls
• End a call
• Transfer a call
• Transfer to a new call
1
• Make a conference call
• Activate call back
• Sending call waiting
• Open Contacts (that is, Local phonebook and Company phonebook)
•Send DTMF
• Viewing DECT information
2
• Turning microphone on/off
3
Tip: It is also possible to configure own In call functions, see 5.9.1 Configure Own In Call
Functions on
page 23, or create a shortcut to a certain In call function, see 5.9.2 Create/Hide
a Soft Key to an In Call Function on
page 24.
The menu is described in User Manual, Ascom d62 DECT Handset, TD 92477GB.
The programming of the menu is done with PDM. For instructions on how to work with PDM,
see Installation and Operation Manual, Portable De
vice Manager (PDM), Windows Version,
TD 92325EN.
Using the PDM and the "Edit template" featur
e, the parameter can be found at
Systems > System X > PBX Settings > In call functionality
Ask your supplier for example templates that will configure the in call m
enu for your PBX.
5.9.1 Configure Own In Call Functions
Besides the default In call functions, it is possib
le to define 10 extra system specific call
services by codes. The codes can be programmed with digits 0-9, #, *, P – pause, H – hook
(auto disconnection), U – the handset prompts for user input with the possibility to enter
numerical characters (procedure call)
1 Select Systems > System X > PBX Settings > In
call functionality > General purpose X
2 In the Name field, enter the name to be
displayed in the In call menu.
3 In the Data field, enter the applicable code to b
e used for the function.
4 Click "OK" to save the settings.
1.This option will be visible in the handset when the parameters "New call" and "Transfer" are set.
2.This option will be visible in the handset when the Admin Menu is activated. See 6 Administration on page 52.
3.This option is always visible in t
he handset and cannot be disabled.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English