ASCOM D62 Configuration Manual

TD 92639EN
08 December 2012 / Ver. H
Configuration Manual
Ascom d62 DECT Handset
24
Tip: Your supplier may have a template example that will configure the In call functions
menu for the PBX.
5.9.2 Create/Hide a Soft Key to an In Call Function
It is possible to configure the left Soft key or right Soft key as a sh
ortcut to a certain In call
function, or hide the Soft keys. By default, the left Soft key is configured as a loudspeaker
key, and the right Soft key is configured as R-key.
Create a Soft Key to an In Call Function
1 If needed, configure the In Call funct
ionality to be used. See 5.9 In Call Menu on page
23. This is not needed if the functions Loudspeaking function
or R-key shall be used.
2 Select Systems > System X > PBX Settings > In
call functionality > Soft key X
3 In the Name field, enter a descriptive name of the Soft key. This is not needed if the
function
s Loudspeaking function or R-key shall be used.
4 In the Function drop-down list, select
the function to be used:
•R-key
• Loudspeaking function
• Start a new call during a conversation
•End a call
• Switch between calls
• Transfer a call
• Transfer to a new call
• Make a conference call
• Activate call back
• Sending call waiting
• General purpose 1 -10
5 Click "OK" to save the settings.
Hide a Soft Key to an In Call Function
1 Select Systems > System X > PBX Settings > In
call functionality > Soft key X
2 In the Function drop-down list, select "Not used".
3 Click "OK" to save the settings. The Soft ke
y will not be visible during a call.
5.10 Own Line Settings
Use the own line settings when it is desired to use the same phonebook in different systems
and in different countries.
The own line settings enables:
• Calling numbers stored with a "+" sign for the internat
ional access code. The same local
phonebook can be used in different countries.
• The recognition of incoming internal or external calls as numbers stored in international
form
at in the local phonebook. The same phonebook can be used in different systems.
For this feature to work, numbers must be stored in the
local phonebook in international
format with a "+" sign for the international access code. Also, the Own Line parameters must
be configured via the PDM/Device Manager.
For instructions on how to work with PDM/Device Manager
, see Installation and Operation
Manual, Portable Device Manager (PDM), Windows Version, TD 92325EN, or Installation and
Operation Manual, IMS3, TD 92762EN.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English