ASCOM D62 Configuration Manual

TD 92639EN
08 December 2012 / Ver. H
Configuration Manual
Ascom d62 DECT Handset
22
Tip: Beside the default call diversion menus, it is possible to define 10 extra system specific
services codes, see 5.6 Call Services.
1 Select Systems > System X (w
here X represents A - H).
2 Select PBX Settings > Diversion.
3 Select "Internal", "External", "On No Reply",
"On Busy", and/or "All Calls"; enter the
following:
• Prefix - the system specific prefix code to be used (if required by th
e PBX used)
• Suffix - the system specific code required t
o activate the diversion (for example
"*21*")
• Cancel - the system specific code required t
o deactivate the diversion (for
example "#23#").
The user can now enter the diversion number in the handset.
5.7.1 Call Diversion in Profiles
It is possible to configure a handset to diverts
calls when a certain profile is activated.
Note: The PBX settings
for call diversion must also be configured, see 5.7 Call Diversion.
1 Select User Profiles > User Profile X > Pre
sence and diversion.
2 Select which calls to be diverted (that i
s all call, internal calls etc.).
3In the Divert calls
to field, enter the phone number where the calls shall be diverted to
when the profile is activated.
4 Select "User Profile X".
5In the Name field
, enter an appropriate name of the profile.
Additional settings can be added f
or a profile, such as soft keys, sound and alert etc. See
5.36.1 User Profiles on
page 46.
5.8 Absence Handling
It is possible to configure user friendly absence menus in the handset using PDM/Device
Manager. These menus can then be selected in the handset by selecting Calls > Call services
> Absence. This menu is used to set the reason why a call cannot be answered, for example
when you are in a meeting. The caller will be notified about the absence reason when he/she
calling.
Beside the default absence menus, it is possible to define 10 extra system
specific services
codes, see 5.6 Call Services on
page 21.
1 Select Systems > System X (w
here X represents A - H).
2 Select PBX Settings > Absence.
3 Select "Common codes", enter the following:
• Activation prefix - the system specific activation prefix code
required to activate
the absence (for example *23*)
• Activation suffix - the system specific activation suffix code required to activate
the absence (for example #)
• Deactivation - the system specific code required to d
eactivate the absence (for
example "#23#").
• PBX date format for user input - the PBX support
ed date format to be sent to the
PBX when activating an absence reason containing a date (for example
"Vacation"). The date in the handset is always entered in MMDD format. If the
parameter is set to DDMM, the handset will automatically convert to correct date
format.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English