EasyManuals Logo

ASCOM D62 Configuration Manual

ASCOM D62
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
TD 92639EN
08 December 2012 / Ver. H
Configuration Manual
Ascom d62 DECT Handset
9
3.2.1 Handset Installation in IP-DECT System using Easy Registration
A handset can subscribe to an IP-DECT system au
tomatically if the following are fulfilled:
The IP-DECT system is configured for Easy Registration,
see the Installation and
Operational Manual for your IP-DECT system.
The handset’s extension number and IPEI are registered in t
he IP-DECT system, see the
Installation and Operational Manual for your IP-DECT system.
The handset is not subscribed to any systems.
The handset software is version 3.2.x or higher.
Subscribe
Subscribe the handset towards the IP-DECT system
. The subscription procedure is described
in the handset’s User Manual.
During the subscription procedure, the handset’s User ID
will automatically be set to the
same as the extension number. The User ID is used to identify the handset when it is
connected to PDM/Device Manager and will be visible in the Number column.
Tip: The User ID can be viewed in the handset by na
vigating to the menu:
Admin menu > Device info > User ID.
See also examples of handset conf
igurations that can be made in chapter 5 Handset
Configuration on
page 18.
3.2.2 Handset Installation in DECT
System (Manually)
NOTE: The handset to be installed must not have any p
revious valid registrations. If it has a
valid registration, unsubscribe the handset.
Subscribe
1 Assign an extension number for the handset in the IP-DECT system. See the
corresponding m
anual for the IP-DECT system.
2 Subscribe the handset towards the IP-DECT system. The subscription procedure is
describ
ed in the handset’s User Manual.
During the subscription procedure, th
e handset’s User ID will automatically be set to
the same as the extension number. The User ID is used to identify the handset when
it is connected to PDM/Device Manager and will be visible in the Number column.
Tip: The User ID can b
e viewed in the handset by navigating to the menu:
Admin menu > Device info > User ID.
See also examples of handset conf
igurations that can be made in chapter 5 Handset
Configuration on
page 18.

Table of Contents

Other manuals for ASCOM D62

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASCOM D62 and is the answer not in the manual?

ASCOM D62 Specifications

General IconGeneral
BrandASCOM
ModelD62
CategoryHandsets
LanguageEnglish

Related product manuals