ASCOM D62 Configuration Manual

TD 92639EN
08 December 2012 / Ver. H
Configuration Manual
Ascom d62 DECT Handset
38
2In the Message alert drop-down list, select “Enhanced beeps according to beep code”.
Custom sounds according to beep code
Beep code sent from a system/application The handset plays:
Beep code 0 No message alert is played
Beep codes 1- 7 Corresponding customized sound
The handset can play customized message alerts that are mapped to beep codes. The
me
ssage ale
rts must first be customized and then mapped to the beep codes.
Tip: It is recommended to use this feature if you want t
o create a message alert that sounds
like the equipment (for example a respirator) that generates an alarm.
Create Customized Sound
1 Select Settings > Custom Sounds > Custom Sound X (where X
represent 1 - 10).
2 Set the following parameters:
• Label - The name of the custom sound (required). The name will be visible when
mapping the custom sound to
a beep code later on.
• Melody - The text string represents a non-polyphonic
sound. By default, example
of melodies are set for Custom Sound 1 - 7. See also Appendix A: Programming
Custom Sound on pa
ge 60.
• Beat - The tempo in beats per minute to be used wh
en playing the sound.
• Style - The ratio of note to rest period to be
used when playing the sound.
• Instrument - The instrument to be used when playing the sound.
Map Beep Codes to Customized Sounds
1 Select Sound and Alerts > Custom Mess
age Alert
2In the Beep code drop-
down lists, select the customized sounds to be used for
respectively beep codes.
Enable Customized Sound
1 Select Settings > Sound and Alert.
2In the Message alert drop-down list, select “Custom
sounds according to beep code”.
5.26.2 Example of TTR/TTP settings
Example 1
This example describes the message handling with the following message settings:
•
TTP= Prioritize forever
• TTR= Close manually
Tip: It is recommende
d to use these settings if messages with the highest priority always
shall be displayed until the user closes the current message.

ASCOM D62 Specifications

General

Brand	ASCOM
Model	D62
Category	Handsets
Language	English