TD 92639EN
08 December 2012 / Ver. H
Configuration Manual
Ascom d62 DECT Handset
17
When the frequency band is set to "Multifrequency", the handset will adopt to the
applicable frequency band (EU, US or Brazil) used in the specific region after it has been
restarted.
NOTE: The handset will adopt to the fre
quency band configured in the DECT system.
The recommended procedure when changing frequency b
and is as follows:
1 The site administrator sends out broadcast m
essage to all handsets informing that
handsets need to be restarted at a specific time.
2 The site administrator enters IP-DECT master and change setting
for the frequency
and carriers just before the specific time.
3 All handset users restart their handsets.
After the restart the handsets have changed to the
applicable frequency band (EU, US or
Brazil).
To Next Page
Loading...
Need help?
General
