TD 93119EN
28 June 2016 / Ver. PA5
User Manual
Ascom d63 DECT Handset
23
Log off a Handset
1Press and hold
.
2 A dialog window "Logout?" appears. Press the soft key "Yes".
NOTE: If a phone is shared and one of the users logs off th
e shared phone, the lock that
prevents the handset from unauthorized use is deactivated. For additional information, see
4.5 Lock and Unlock the Handset on
page 24.
4.3 Turn the Audible Signal On or Off
Note: If handset restrictions are enabled, you might not be able to turn off the audible
signal. See Configuration Manual, Ascom d63 DECT Handset, TD 93151EN.
A long press on the
or in idle mode, changes between ring signal on/off.
The
icon indicates a silenced handset.
4.4 Lock and Unlock the Keypad
Lock and Unlock the Keypad in Idle Mode
To prevent accidentally pressing keys, the keys can be locked
.
Lock keypad
1Press
.
2Press "Lock".
Unlock keypad
1Press
.
2 Press "Yes".
Note: An incoming call can be answered and the
alarm button can be pressed while the
keypad is locked. If configured in the WinPDM/Device Manager, an emergency call can also
be made while the keypad is locked. See the Configuration Manual for the handset (TD
number: See 17 Related Documents on
page 91).
Lock/Unlock the Keypad during a Call
To prevent accidentally pressing keys, the keys can be locked during a call. This can be useful
when a headset is used and the h
andset is attached to a pocket or belt.
Lock keypad
1Long press
.
2Press "Lock".
Unlock keypad
1Press
2 Press "Yes".
Note: Wh
en the keypad is Iocked, the volume buttons and the mute button can be pressed
during the call. Depending on what model of handset that is used, the Alarm button can also
be pressed. For information about what functions that are supported by existing handset
models, see 1.2 Functions and Accessories on
page 2.
To Next Page
Loading...
Need help?
General
