ASCOM d63 - Lock and Unlock the Keypad During a Call; Audio Transfer; Start a New Call During Conversation; Switch between Calls

TD 93119EN
28 June 2016 / Ver. PA5
User Manual
Ascom d63 DECT Handset
29
5.4.5 Lock and Unlock the Keypad during a Call
To prevent accidentally pressing keys, the keys can be locked during a call. This can be useful
when a headset is used and the h
andset is attached to a pocket or belt.
Lock keypad
1Long press
.
2Press "Lock".
Unlock keypad
1Press
2 Press "Yes".
NOTE: When the keypad is locked, the volume buttons a
nd the mute button can be pressed
during the call. Depending on model of handset, the Alarm button can also be pressed. For
information about what functions that are supported by existing handset models, see 1.2
Functions and Accessories on
page 2.
5.4.6 Audio Transfer
To transfer audio between the Bluetooth he
adset and the handset’s earpiece.
NOTE: This option is only visible if a Bluetooth connection is active.
1 Press the soft key "More" during the call.
2 Select "Audio transfer".
3 Press "Select".
5.4.7 Start a New Call during Conversation
NOTE: This option is only visible if configured in the
handset. For more information, see the
Configuration Manual for the handset (TD number: See 17 Related Documents on
page 91).
1 Press the soft key "More" during the call.
2 Select "New Call".
3 Press "Select".
4 Enter number, or press
to access the phonebook.
5Press
.
5.4.8 Switch between Calls
Prerequisite,
a new call has been started during conversation, see 5.4.7 Start a New Call
during Conversation on
page 29.
NOTE: This option is only visible if configured in the
handset. For more information, see the
Configuration Manual for the handset (TD number: See 17 Related Documents on
page 91).
1 Press the soft key "More".
2 Select "Switch".
3 Press "Select" to switch between the calls.