TD 93119EN
28 June 2016 / Ver. PA5
User Manual
Ascom d63 DECT Handset
43
6.12 Calling while Reading a Text Message
A user can make a call while reading a text message to review and discuss the message with
the called party. The called party may be either:
• The message sender, that is, the same party that sent the text message
• A different party.
The user can activate the loudspeaker function during the call to make it easier to read the
received text message while talking to the called party.
6.12.1 Calling the Message Sender
To call the message sender while reading and reviewing a received text message, perform
the following steps:
1 Receive the text message and call the message sender as described in Call Sender on
page 62.
2 Wait for the called party to reply. The message is replaced by the ongoing call details.
The user may now:
• Continue with the call without referring back to the received message.
• Redisplay the message and continue the call to further review and discuss the
message. See
Redisplay the Message and Continue with the Call on page 43.
• Redisplay the message and terminate the call. See Redisplay the Message and
Terminate the Call on page 44.
6.12.2 Calling a Different Party
To call another party to read and review a received text message, perform the following
steps:
1 Open the message as described in 8.5 Messaging on page 61 and press the "More"
soft key.
2 From the pop-up menu, navigate to the "Call" menu item and press the "Select" soft
key. The pre-dial screen is displayed. Enter the number of the party to be called or
select a number from the handset call list or local or central phone books.
3 Press the "Call" soft key and wait for the called party to reply. The message is
replaced by the ongoing call detail. The user may now:
• Continue with the call without referring back to the received message.
• Redisplay the message and continue the call to further review and discuss the
message. See
Redisplay the Message and Continue with the Call on page 43.
• Redisplay the message and terminate the call. See Redisplay the Message and
Terminate the Call on page 44.
Redisplay the Message and Continue with the Call
1 To redisplay the message while the call is ongoing, select the "More" soft key.
2 From the pop-up menu, select "Messaging".
3 From the Messaging menu, select "Inbox". The received message summary is
displayed.
4 Press the "View" soft key to display the message in full. If required, use the four-way
navigation key to scroll up and down a long text message to reveal the content while
reviewing and discussing the message with the called party.
To Next Page
Loading...
Need help?
General
