TD 93119EN
28 June 2016 / Ver. PA5
User Manual
Ascom d63 DECT Handset
59
The handset sends a diversion reason code to the system by establishing a call. The code is
defined when configuring the diversion reason in the handset. For more information, see the
Configuration Manual for the handset (TD number: See 17 Related Documents on
page 91).
The call is automatically disconnected after a few seconds.
To stop diversion select "Deactivate
" and press the confirmation button or the Soft key "OK".
Divert Calls When Busy
1 Select "When busy".
2 Select "Activate".
3 Enter number (maximum 24 digits) to divert to, or press the soft key
to open
the phonebook.
4Press "OK"
The handset sends a diversion reason code to the system by estab
lishing a call. The code is
defined when configuring the diversion reason in the handset. For more information, see the
Configuration Manual for the handset (TD number: See 17 Related Documents on
page 91).
The call is automatically disconnected after a few seconds.
To stop diversion select "Deactivate
" and press the confirmation button or the Soft key "OK".
8.3 Shortcuts
Predefined functions can be set as shortcuts for the Soft keys, Hot keys, Navigation keys
and the Multifunction button. For example, a soft key can be set to make a call, as a shortcut
to send a message or to a menu.
Tip: If creating a shortcut to the
Phone call function, a variable or character U in the Enter
number field can be added that lets the user enter additional numerical characters before
calling the number. See 9 Procedure Call on
page 75 for more information.
1 Enter the menu by pressing the “Menu” Soft ke
y, or the confirmation button on the
Navigation key.
2 Select
in the menu, and press the confirmation button or the Soft key "Select".
8.3.1 Define Soft Keys
1 Select "Soft keys".
2 Select "Left", "Middle", or "Right".
3 Press "Select" to enter a name for the Soft key.
4Press "OK".
5 Select "Function", and press "Select" to select function for th
e Soft key.
6 Select function from list, and press "
Back".
7 Select "Value" (only for some of the functions), and press "Select". Enter a
value for
example a handset number. Press "Back".
8 Select "Control question", and press "Select". It is off by default
. Press "Back".
9 Press "Save".
To Next Page
Loading...
Need help?
General
