TD 93119EN
28 June 2016 / Ver. PA5
User Manual
Ascom d63 DECT Handset
41
Figure 6. Example of an interactive message
Mobile data from the handset can initiate the application to send t
he interactive message,
see 6.13 Mobile Data on
page 44.
For more information, see the Func
tion Description, Interactive Messaging (TD number: See
17 Related Documents on
page 91).
6.8 Message Indication Repetition
The handset can be configured to repeat the audio and visual message received alert
described in 6.3 Receive a Message on
page 35. The alert repeats every seven seconds until
the user reads the message or turns the alert off.
For the appropriate message settings, see
the Configuration Manual for the handset (TD number: See 17 Related Documents on
page
91).
Certain system-defined properties ca
n be assigned to a message to give it a high priority, for
example, an alarm priority message. Alert repeats start automatically when a high priority
message is received. Such messages do not need to be explicitly configured to trigger alert
repeats. A high priority alert is repeated every 10 seconds for a maximum of 5 minutes and
then the alert stops.
Alerts continue to be repeated until the user presses the hook-on, mute butt
on or soft key
for accessing the message.
Note that message indication repeat is a system
dependent feature that cannot be
activated from the handset.
6.9 Colored Messaging
NOTE: The support for this system dependent feature is dependent on what model of
handset that is used. For more information, see 1.2 Functions and Accessories on
page 2.
Colored messages can be sent to handsets. The sen
der of a message, that is, an application,
determines the color of the message. Colored messaging can be useful for categorizing
To Next Page
Loading...
Need help?
General
