TD 93119EN
28 June 2016 / Ver. PA5
User Manual
Ascom d63 DECT Handset
71
5Enter PIN code.
6Press "OK".
7 Press the "Back" soft key twice to return to the "Locks".
8 Select "Auto lock time".
9 Select the required lock time.
If the PIN code has been forgotten, it can be removed by the handset distributor.
Deactivate the Phone Lock
From the handset "Settings" menu:
1 Select “Locks”.
2 Select “Phone lock”.
3 Select “Auto phone lock”.
4 Select "Off".
5Enter PIN code.
6Press "OK".
Change PIN Code
From the handset "Settings" menu:
1 Select "Change PIN code".
2 Enter the old PIN code.
3Press "OK".
4 Enter new PIN code twice.
5 Press "Save".
8.8.4 Display Settings
Screen Saver
The screen saver can be set to one of the following settings:
• Information: Displays status and identification information while the handset is idle.
• Black: The screen is black when the handset is idle.
• Black also in call: The screen is also black when the handset is in call.
To set the screen saver:
1 Select “Display” from the handset menu.
2 Select “Screen saver”. The current setting is displayed under "Screen saver".
3 Select “Information”, “Black”, or “Black also in call”.
4 Press "Back".
NOTE: When the handset with the screen saver set to "Information" is in a charger, the
Owner ID is displayed even if the handset switched off. This simplifies identification when
many handsets are in a charging rack.
To Next Page
Loading...
Need help?
General
