TD 93119EN
28 June 2016 / Ver. PA5
User Manual
Ascom d63 DECT Handset
55
8.2.5 Accept an Invitation
Accept Invitation Received as Incoming Call (PTT Basic)
A PTT invitation received as an inco
ming call is indicated by the icon. In the dialogue
window, a message containing maximum 24 characters ca
n also be shown. See figure 9.
Figure 9. Incoming Invitation Received as a Call
1 Press “Accept”, or
.
Default the handset starts in inverted mute and loudspeaking mode, but it can be
co
nfigured differently in a PTT group.
2Press and hold
to open the microphone for transmitting. The microphone is
muted again when
is released.
3 The Multifunction button may have also been
configured to act as the button.
NOTE: The support for Multifunction button is dependent on what model of handset
that is
used. For more information, see 1.2 Functions and Accessories on pa
ge 2.
Invitation Received as Incoming Call duri
ng an Ongoing Call
If a user receives an invitation
during an ongoing call, it is displayed as an ordinary
invitation, see figure 9 on page 55. The user can either accept or decline the invitation by
pressing "Accept" or "Decline", re
spectively.
Note: Th
e invitation cannot be accepted or declined by pressing or , respectively.
If the user presses “Accept”, the ongoing call
is disconnected and the PTT call is connected.
Alternatively, the ongoing call can
also be disconnected and the PTT call connected if the
following is fulfiled:
• The handset is configured to answer invita
tions automatically
• The user does not respond to the invita
tion within 10 seconds
• The invitation has higher priority than the ongoing call
If the user declines the invitation, the he/s
he can re-join the PTT later on, see 8.2.8 Re-join a
Group on
page 57.
Accept Invitation Received as Message (PTT Advanced)
A PTT invitation received
as a message is viewed the same way as an ordinary message. The
message can contain up to 1000 characters. See figure 10 on page 56.
To Next Page
Loading...
Need help?
General
