TD 93119EN
28 June 2016 / Ver. PA5
User Manual
Ascom d63 DECT Handset
68
View Last Search Result
1 Select "Last result". Only the last r
esult is displayed.
8.8 Settings
1 Enter the menu by pressing the “Menu” Soft key, or the confirmation button on the
Navigation key.
2 Select
in the menu, see 3.8 Settings on page 20.
8.8.1 Sound and Alert Settings
Adjust the Ring Volume
1 Select "Sound & Alerts.
2 Select “Volume”.
3 To increase the volume, press right on the
navigation key. To decrease the volume,
press left on the navigation key. Press Back to save the setting.
NOTE: If a handset restriction is enabled, it migh
t not be possible to set the ring volume to
"Silent". See the Configuration Manual for the handset (TD number: See 17 Related
Documents on
page 91).
Set different Ring Signals for Calls
1 Select “Sound & Alerts”.
2 Select “Ring signals”.
Different signals for inter
nal calls, external calls and call back can be set.
3 Select "Internal call", "External call", "Call
back" or "PTT". The handset has 14 different
ring signals.
4 Select sound. To listen to the different sounds, press "Play"
.
NIOTE: Additional ring signals might be selectab
le if them are configured via WinPDM. For
more information, see the Configuration Manual for the handset (TD number: See 17
Related Documents on
page 91).
5 Press "Back".
Set Alerts for Messages
1 Select “Message alert”. Different message al
erts can be selected. The handset has 8
different message alerts by default, see 3.8 Settings on
page 20.
2 Select message alert from list. Pres
s "Play" to listen to the different sounds.
TIP: The option Custom sounds should
be selected to create a customized message
alert. For more information, see the Configuration Manual for the handset (TD
number: See 17 Related Documents on
page 91).
NOTE: The "Play" soft key is not available for Enhanced beep and Cust
om sound.
Instead, send a message to the handset to listen to the sound.
3 Press "Back".
TIP: By default, the message volu
me follows the ring volume setting. However, a different
message volume can be set if required. See the Configuration Manual for the handset (TD
number: See 17 Related Documents on
page 91).
To Next Page
Loading...
Need help?
General
