2727
2727
27
20323163en_ba_a0
Provider selectionProvider selection
Provider selectionProvider selection
Provider selection
You can also telephone via another provider if you subscribe to their service. You have the
option of assigning a provider to phonebook entries (see »Phonebook«): Outgoing calls to these
telephone numbers are always carried by the defined provider.
Defining a fixed providerDefining a fixed provider
Defining a fixed providerDefining a fixed provider
Defining a fixed provider
If you always want to dial via the same provider, you can define a fixed provider:
Press the menu key repeatedly until the display shows »Provider«.
Press the OK key to confirm.
The display shows »Fixed provider«. Press the OK key to confirm. The display
shows »Fixed provider_« and the current setting.
Press the right arrow key to select the provider.
Press the OK key to confirm. The pictogram
P (Provider) is displayed.
Programming the provider listProgramming the provider list
Programming the provider listProgramming the provider list
Programming the provider list
If you want to use different providers, you can enter these in the provider list. You may program
up to 4 providers.
Press the menu key repeatedly until the display shows »Provider«. Press the OK
key. The display shows »Fixed provider«.
Press the menu key. The display shows »Provider list«.
Press the OK key to access »1:Provider«. Press the OK key again. »No._« and
the cursor position are shown.
Enter the provider’s code, press OK to confirm. »Name_« and the cursor
position are shown. Enter the provider’s name (max. 8 characters).
Press the OK key to confirm. To enter a second provider, proceed as described
above.
Telephoning
To Next Page
Loading...
Need help?
General
