7373
7373
73
20323163en_ba_a0
PBX access
Enter the new internal number length.
Press the OK key to confirm.
To exit the menu, hold down the ESCAPE key.
➭
For further information on internal number lengths, refer to your PBX documentation.
Setting the transfer typeSetting the transfer type
Setting the transfer typeSetting the transfer type
Setting the transfer type
To transfer calls internally over the PBX network, you need to set a transfer type. The type of
transfer (functional or with disconnect) depends on your PBX.
Transfer with disconnectTransfer with disconnect
Transfer with disconnectTransfer with disconnect
Transfer with disconnect
Press the menu key repeatedly until »Installation« is displayed.
Press the OK key to confirm.
Press the right arrow key (>) until the display shows »PBX«.
Press the right arrow key (>) repeatedly until the display shows »Disconnect
transfer«.
Use the right arrow key to activate/deactivate the function.
Press the OK key to confirm.
If you wish to exit the menu, hold down the ESCAPE key.
➭
You can conduct a test to find out which settings you need to make. During a call, set up
a second call via »«Enquiry« and try to connect the two call partners (see »Transferring
calls«). If this is impossible, you need to change the transfer type.
To Next Page
Loading...
Need help?
General
