ASCOM Eurit 25 - Software Version and Remote Download

7777
7777
77
20323163en_ba_a0
Attachment
RenumberingRenumbering
RenumberingRenumbering
Renumbering
If a country introduces renumbering (national access code changed), you can pre-program the
national prefix for Switzerland and the international traffic selection digit (TSD) for calls abroad:
Setting the national traffic selection digit (TSD)Setting the national traffic selection digit (TSD)
Setting the national traffic selection digit (TSD)Setting the national traffic selection digit (TSD)
Setting the national traffic selection digit (TSD)
The national traffic selection digit is the first digit in the prefix. This pre-programmed number
must only be changed or deleted if you are unable to make domestic calls from the caller list or
call log. If this problem arises and you are connected to a PBX, refer to the section on »PBX
access«.
Press the menu key until »Installation« appears. Press the OK key.
Press the menu key until »Location« appears. Press the OK key.
When »National TSD« is displayed, confirm by pressing the OK key.
The display shows the pre-programmed national TSD and the cursor position.
Enter the relevant national TSD (the preset TSD is overwritten).
Press the OK key.