8080
8080
80
20323163en_ba_a0
Attachment
Resetting the phoneResetting the phone
Resetting the phoneResetting the phone
Resetting the phone
You can reset the phone to default status as follows:
Press the menu key repeatedly until the display shows »Installation«.
Press key 1 on the dialling keypad. The display shows the reset option: »Full
reset«.
Press the OK key to confirm.
If you wish to exit the menu, hold down the ESCAPE key.
➭
»Full reset« deletes all settings e.g. call transfer procedure, EAC etc., and all the data you
have stored e.g. phonebook entries, speed dial keys etc.
Headset connectionHeadset connection
Headset connectionHeadset connection
Headset connection
You can connect a headset (earpiece and external microphone) to your Ascom Eurit 25.
The headset is available from any specialist dealer. When purchasing a headset from a specialist
dealer, make sure it is compatible with your Ascom Eurit 25.
For details on how to connect and operate the headset, refer to the headset instructions.
The following settings need to be made before you operate the headset:
Press the menu key repeatedly until »Installation« is displayed.
Press the OK key to confirm.
Press the right arrow key (>) until the display shows »Headset«. Press the OK
key to confirm.
Use the right arrow key (>) to activate/deactivate the function.
Press the OK key to confirm.
If you wish to exit the menu, hold down the ESCAPE key.
➭
Once you have set the phone for headset operation, you can accept and terminate calls
by pressing the loudspeaker key.
To Next Page
Loading...
