7474
7474
74
20323163en_ba_a0
PBX access
Call transfer on-hookCall transfer on-hook
Call transfer on-hookCall transfer on-hook
Call transfer on-hook
You can transfer a call within the PBX network or externally by replacing the handset. To do
this, you need to set the phone:
Press the menu key repeatedly until »Installation« is displayed.
Press the OK key to confirm.
Press the right arrow key (>) until the display shows »PBX«. Press the OK key to
confirm.
Press the right arrow key (>) repeatedly until the display shows »On-hook
transfer«. Press the OK key to confirm.
Use the right arrow key to activate/deactivate the function.
Press the OK key to confirm.
If you wish to exit the menu, hold down the ESCAPE key.
➭
»Call transfer on-hook: off« means that the active call is terminated when replacing the
handset and the held call is signalled.
➭
»Call transfer on-hook: on« means that the active call is transferred to the held call when
the handset is replaced.
To Next Page
Loading...
