Document History
User Manual
Ascom Myco Smartphone
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer, or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil num?rique de la Classe B conforme ? la norme NMB-003 du Canada.
Privacy of communications may not be ensured when using this handset.
A.3.2 Exposure to Radio Frequency Signals
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
device complies with FCC SAR limit of 1.6 W/kg.
The maximum SAR value measured:
Head Body
SH1-ACAA 0.580 W/kg 1.229 W/kg
SH1-ABAA 0.405 W/kg 0.544 W/kg
SH1-ABBA + SH1-ABBB 0.324 0.518
The handset is designed to be worn with the display toward the body for best radio performance. SAR
testing is made with no separation, to approve the device to be carried close to the body.
This device must not be co-located, or operating in conjunction with any other antenna, or transmitter.
Use of non-Ascom approved accessories may violate the FCC and ISED guidelines for RF exposure and
should be avoided.
A.3.3 Band Restrictions (Canada)
The band 5150-5250 MHz is restricted to indoor-only operation
A.4 Precautions and Environmental Requirements
A.4.1 Hazardous Substance Information
The Hazardous substances or material table is compiled according to SJ/T 11364 standard.
0 indicates that the concentration of the hazardous substance in all homogeneous materials of the part is
below the relevant threshold of the GB/T 26572 standard.
X Indicates that the concentration of the hazardous substance in at least one homogeneous materials of the
part is below the relevant threshold of the GB/T 26572 standard.
Parts (Pb) (Hg) (Cd) (CR 6) (PBB) (PBDE)
PCB
assemblies
X 0 0 0 0 0
Plastic
enclosure
0 0 0 0 0 0
Metallic
enclosure
0 0 0 0 0 0
102 TD 93066EN / 14 December 2018 / Ver. N
To Next Page
Loading...
