User Manual
Ascom Myco Smartphone
Introduction
1 Introduction
The Ascom Myco Smartphone is a durable and robust handset, purpose built for nurses, caregivers and
clinicians. Alerts from patient monitors, and communication from staff and patients, are available to you at all
times, wherever you are on-site. With the top display, color coded LED priority beacon and touchscreen you
have the ability to quickly respond to alerts.
The Ascom Myco Smartphone is referred to as the handset in this manual.
This document describes features and functionality for the following handset versions of the Ascom Myco
Smartphone:
• Ascom Myco 2 Wi-Fi and DECT (GMS or non-GMS)
• Ascom Myco 2 Wi-Fi and Cellular (GMS or non-GMS)
• Ascom Myco Wi-Fi
• Ascom Myco Wi-Fi and Cellular
Read Appendix A Safety Precautions, page 100 before using the handset.
For a list of:
• Handset features, see 1.3 Features, page 2.
Target Group
This document is targeted at personnel responsible for handling the administration and distribution of
handsets at the end customer site.
It is also intended for the end user, or anyone interested in acquiring deeper knowledge about the handset.
Prerequisites
Before the handset can be used, an administrator must do the following:
1. If the Cellular handset version is used, insert a micro-SIM card from a mobile network operator into the
handset. See 2.1 Insert SIM Card, page 4.
2. Register the handset in the PBX for voice, in the applicable Unite module(s) for messaging, and the
optional central management (Easy deployment) for setup and configuration of handsets. See the
Configuration Manual, Ascom Myco Smartphone.
3. If the handset is used in a DECT system, subscribe the handset to a DECT base station and log in to an
extension number.
4. Read the safety precautions in Appendix A Safety Precautions, page 100.
How to Use This Document
This document describes the features and settings of the Ascom Myco Smartphone. It is referred to as the
"handset" in the manual, and especially marked with "Ascom Myco 2 only", "GMS version only", "Wi-Fi only",
"DECT only", or "Cellular only", whenever the functionality differs between handset versions.
All assigned locations and alerts in this document are according to default programmed versions, but
additional functions, and factory settings are also included to cover additional functionality.
The images can differ, depending on the software version.
For software download and parameter setup, see the Configuration Manual, Ascom Myco Smartphone.
TD 93066EN / 14 December 2018 / Ver. N
1
To Next Page
Loading...
