ASCOM Myco - Wake and Unlock the Handset, or Lock and Put It to Sleep; Screen Lock

Basics
User Manual
Ascom Myco Smartphone
If required, type the PIN/password.
3. Wait for the handset to start.
Turn the Handset Off
1. Long press the Power button.
2. Tap Power Off.
4.2 Wake and Unlock the Handset, or Lock and Put It to Sleep
The handset automatically turns to sleep after 1 minute (default), to save battery time. If the screen lock
functionality is enabled (default) the handset is locked automatically when entering sleep mode.
If changed from the default setting, a new sleep time setting is applied to any new user logged into
the handset. See 16.1.4 Sleep Timeout, page 83 to know how to change the sleep timeout time.
By default the Lock screen shows the current date and time, and can also be configured to show alerts,
warnings, messages, and missed calls. See 11.4 Lock Screen Notifications, page 69 for information on how
to use lock screen notifications.
Even if the handset is locked, you can answer incoming calls, and use the Multifunction/Alarm
button. An emergency call can also be made while the screen is locked, depending on configura-
tion. All alerts appear in the top display, even when the handset is in sleep mode. See 7 Alerts,
page 51, or 5 Calling, page 34 for details on how to handle alerts and calls.
Wake and Unlock the Handset
To wake the handset from sleep mode, do the following:
1. Press the Power, or Home button.
2. If needed, swipe up the Lock icon
to unlock the screen.
A PIN, or a password might be needed to unlock the handset.
Put to Sleep and Lock the Handset
• Press the Power button, or wait until the handset automatically turns to sleep.
TIP: When not using the handset, put it to sleep mode. This avoids unintentional display taps as it locks the
screen.
4.2.1 Screen Lock
A screen lock on the handset is used to prevent any unauthorized access. To access a handset, with an
activated screen lock, a specific action or sequence of actions needs to be correctly performed.
On the GMS handset versions, the screen lock is part of the Android Factory Reset Protection
(FRP). For more information, see "Prepare a GMS Handset Version for a Factory Reset" in the
Configuration Manual, Ascom Myco Smartphone.
Toggle Screen Lock
To select, or change, a screen lock, go to: Settings > Admin settings > Security > Screen lock. The
available screen lock options are None, Swipe, PIN and Password.
14
TD 93066EN / 14 December 2018 / Ver. N