User Manual
Ascom Myco Smartphone
Alerts
Figure 42. An example of a "Code Blue" (crisis) alert
Crisis alerts always override any system warning, or phone call and are indicated by:
• Red frame around the alert
• LED beacon flashing in the color of the alert
• Icon
• Siren
• Vibration
The siren indicating priority 1 alerts will break-through vibrator only, and silent mode.
Indications of pending (not yet handled) priority 1 alerts are repeated every tenth second for five
minutes.
7.4 Alert Classification
The following can be used to classify alerts:
• Colors
− Used to show category, or priority of an alert.
• Icons
− Used to give an indication of the alert category, for example a nurse call, or a lab result.
7.4.1 Colors
Colors can be used to show the category, or priority of an alert. The color of an alert is shown by a color bar
to the left of each alert in the alert view. For incoming alerts, the color is also shown on the color-coded LED
beacon, see 11.2 Color-Coded LED Signals, page 68.
Figure 43. Alerts labeled with colors
The following colors are available:
•
Red
TD 93066EN / 14 December 2018 / Ver. N 55
To Next Page
Loading...
