EasyManua.ls Logo

ASCOM Myco - Automatic Call after Alarm

ASCOM Myco
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Manual
Ascom Myco Smartphone
Personal Alarm
Press the Volume button (up, or down)
If the handset is locked with a PIN, or password, it needs to be unlocked before the alarm can be
canceled.
10.2.4 Automatic Call after Alarm
A handset can be configured to call a predefined number after an alarm has been sent.
Depending on the configuration, the call can be established in the following modes:
Normal mode - The call is established as an ordinary call.
Loudspeaker mode - Loudspeaker mode is used by default during the call.
Monitor mode - A one-way "hidden" call where the called party can listen in but cannot communicate
with the calling handset.
See the Configuration Manual, Ascom Myco Smartphone for instructions on how to configure the automatic
call after alarm.
TD 93066EN / 14 December 2018 / Ver. N 67

Table of Contents

Other manuals for ASCOM Myco

Related product manuals