ASCOM Myco - Unite Log In, or Log out; Log in

User Manual
Ascom Myco Smartphone
Basics
Remove the Battery Pack:
1. Turn off the handset to prevent data loss or damage to the handset, see 4.1 Turn the Handset On, or
Off, page 13.
2. Slide the Battery cover lock to the right.
3. Press the upper part of the clip to open it fully.
4. Remove the Battery Pack.
Insert the Battery Pack:
1. Press the upper part of the clip to open it fully, then insert a fully charged Battery pack.
2. Slide the Battery cover lock to the left to lock it.
The handset starts automatically after the battery is connected.
3. Release the clip.
If the battery replacement is done within WiFi network coverage, the time and date settings are
synchronized automatically.
If the handset is used in DECT mode and no WiFi network is available, there are two options to
update the time and date settings:
• Place the handset in an area with WiFi network coverage for automatic synchronization.
• Configure time and date manually.
4.12 Unite Log In, or Log Out
The login functionality is system dependent and is enabled through the Unite CM/Unite CS, see
the Configuration Manual, Unite Connectivity Manager/Configuration Manual, Unite Communica-
tion Server.
If login is required for the handset, you must log in to access features such as messaging, alert handling,
and the My Services app.
Important
The login functionality is mainly intended as a method to use your personal messaging and
alerts number on any handset. It cannot be used to transfer phone numbers, services,
messages, or alerts between handsets. Alerts and messages stored on a handset are visible to
all users logging in on the handset.
If the handset is set up as a shared phone, and if a new user logs in, any alerts, conversations and
call logs that are stored on the handset will be purged automatically.
For instructions on how to:
• Log in, see 4.12.1 Log In, page 25.
• Handle the login reminder, see 4.12.2 Login Reminder, page 27.
• Log out, see 4.12.3 Log Out, page 28.
• Use the recent users list, see 4.12.4 Recent Users List, page 29.
4.12.1 Log In
To log in and access the alert, messaging, and My Services functionality:
1. Press the Home, or Power button to activate the display.
2. Unlock the screen.
TD 93066EN / 14 December 2018 / Ver. N 25