User Manual
Ascom Myco Smartphone Quick Installation Steps for Administrators
Figure 3. Instructions for sharing code by using NFC
Quick setup by scanning a bar code does not automatically provide the handset with a DECT
subscription. Before the handset can be used in DECT environment, the administrator must do one
of the following:
• Manually subscribe the handset to the DECT system and log in to an extension manually.
• Enable the DECT Easy Registration feature for automatic DECT subscription and login.
If needed, follow the steps in 2.2.1 Install Using Easy Deployment, page 5 to add a messaging number to
the handset after installation.
2.2.3 Manual Installation
If neither QR codes, nor Easy Deployment is available, the handset can be manually installed through the
admin settings menu. See the installation chapter of the Configuration Manual, Ascom Myco Smartphone.
TD 93066EN / 14 December 2018 / Ver. N
7
To Next Page
Loading...
