ASIX Forte - Page 80

Page 80
Serial.Order
integer
0 HiLo hilo
1 hilo HiLo
2 LoHi lohi
3 lohi LoHi
Serial.Write.BeforeProg
boolean
If true, current serial number is "written" into opened HEX
editors just before programming the device.
Serial.Write.AfterProg
boolean
If true, current serial number is "written" into opened HEX
editors after successful programming.
Serial.Succ.AfterProg
boolean
If true, next serial number is generated after successful
programming.
Serial.LogSN
boolean
If true, the result of programming is logged to a selected
file.
Serial.LogFile
string
File name of a file where the result of the programming
will be logged.
ICSP.LongTime
boolean
If true, longer times for switching Vcc are taken.
ICSP.LongTime.Time.SwOn
integer
Time to wait after Vcc is switched on in microseconds.
ICSP.LongTime.Time.SwOff
integer
Time to wait after Vcc is switched off in microseconds.
SpecSettings.PREST.Power
integer
0 idle power supply is None / External
1 idle power supply is Internal 5V
SpecSettings.PREST.ProgPower
integer
0 power supply during programming is
External 2.7 to 5.5V
1 power supply during programming is
Internal 5V
SpecSettings.PREST.i2cSpeed
integer
0 100kHz
1 500kHz
2 1MHz
3 Maximal
SpecSettings.PREST.i2cAddr
integer
0 first suitable address or N/A
1 second suitable address
etc...