Page 76
You can set an automatic check for newer versions on the
web in Options âž™ Program settings âž™ Others.
5.12
Appendix A UP_DLL.DLL
This appendix deals with the names of settings and
values of functions in the UP_DLL.DLL library.
Please look at the sample batch files in UP installation
folder for better understanding.
The following information is provided only for experienced
users and does not provide any guarantee.
5.12.1 Data Types
string is string
integer signed 32bit value
boolean accessed like integers; 0 is false, other
value is true
5.12.2 List of UP variables
Prog.LoadFileBfgProg
boolean
If true, current file is reloaded before device (or its part) is
programmed.
Prog.LoadFileBfgProgWarnMod
boolean
If true, the program warns when it is set to reload current
file before programming and data in some editor have
been manually modified.
Prog.LoadFileBfgProgWarnOnNoChange
boolean
If true, the program warns when it is set to reload current
file before programming and the content of the loaded file
has not changed from the previous programming.
File.AutoCheck
boolean
If true, current file is periodically tested for changes.
File.LoadOnModify
boolean
If true, when change is detected, question pops up.
FileLoad.ClearData
FileLoad.ClearCfg
FileLoad.ClearID
FileLoad.ClearCode
boolean
If true, the contents of code memory is erased (in UP
memory) before new file is loaded;
all cells not stored in the file will have its default (blank)
state.
Part.Name
string
Selected device name
Prog.Name
string
Selected programmer name
Possible values are PREST, FORTE.
Prog.PortBase
integer
Serial number of programmer
To Next Page
Loading...