Page 77
Prog.UseOnlyThisSN
boolean
If true, the SN saved in the up.ini is always used regardles
of the SN contained in a project file.
LanguageFile
string
Relative path to used languange file
Project.File
string
Project file path
Project.Present
boolean
Project.Template
boolean
If true, the user is asked for project name before its
saving.
HexFile.File
string
Opened current file path
HexFile.Present
boolean
HexFile.IHex
boolean
If true, the file with extension different from .HEX or .BIN
is loaded as HEX file.
HexFile.Template
boolean
If true, the user is asked for name before saving.
HexFile.SaveVoid
boolean
If true, empty cells are saved, too.
HexFile.AskForBinEndian
boolean
If true, the user is asked if the loaded BIN file should be
loaded as Little or Big endian.
HexFile.BinLittleEndian
boolean
If true, the loaded BIN file is loaded as Little endian.
HexFile.LoadDataAuto
boolean
If true, with file is loaded also a separate file for data
memory.
HexFile.LastDataFile
string
Path of a separate file for data memory.
HexFile.DataIHex
boolean
If true, the file for data memory with extension different
from .HEX or .BIN is loaded as HEX file.
Prog.QBfrEraseFlash
boolean
Question before erasing flash devices
Prog.QBfrProgFlash
boolean
Question before programming flash devices
Prog.QBfrProg
boolean
To Next Page
Loading...