Astoria Core 600 - Machine Alarms; Automatic Steam Wand Temperature

TECHNICIANS' manual40 of 104
7.2 Machine warnings
To view the machine alarms, press the button.
Tel. 00000000000
Fillingup timeout warning
Select the button to view the machine's current warn-
ings (see the list below).
Should any of these occur, call out the Technician by calling
the number shown on the display.
To exit, press the
button.
Warnings Alarm
Steam heating unit temperature
probe has overheated or short-
circuited
Warning data is corrupted
Steam heating unit temperature
probe is disconnected or cut off
Change lter warning (90%
worn)
Cup warmer temperature probe
has overheated or short-circuited
Filter completely worn
warning
Cup warmer temperature probe is
disconnected or cut off
Maintenance warning
Steam nozzle probe has short-cir-
cuited
Heating unit heating time-
out warning
Steam nozzle probe is discon-
nected or cut off
Volumetric counter warning
for each group
Fillingup timeout warning
Select the button to view the machine’s alarm history.
To exit, press the
button.
24/01/17 15:09:29
24/01/17 15:09:29
100%lterregeneration
1/1
90%lterregeneration
Should an alarm occur, call out the Technician by
calling the number shown on the display and turn
off the machine.
7.3 Automatic steam wand temperature
Select the button to programme the temperature of the
automatic steam wand:
• Use the
and arrows to set the desired temper-
ature.
• Toconrm,pressthe
button.
• To exit, press the
button.
HIGH TEMPERATURE HAZARD: Please remember
that a very high temperature can cause very seri-
ous burns.
CUP WARMER AUTOMATIC
STEAM WAND
65
°C