Astoria Core 600 - Software Update

TECHNICIANS' manual 67 of 104
8.6 Software Update
8.6.1 DISPLAY software update
• Turn the machine o.
• Insert the memory stick (
1) into the front of the ma-
chine;
• Turn the machine on again;
• Wait for the update to nish installing;
• Turn the machine o;
• Remove the memory stick (
1) from the front of the
machine and switch the machine back on.
1
The only stick that can be used in the USB port is
the USB stick provided exclusively to the Mainte-
nance Technician. Do not connect external devices
(iPhones, iPads, PCs, etc.) to the USB port because it could
create serious machine software problems.
XPV35 BOOTLOADER VER. 01.05
Looking for Firmware file...
Found! Erasing FLASH for Firmware file...
XPV35 BOOTLOADER VER. 01.05
Looking for Firmware file...
Found! Erasing FLASH for Firmware file...
FLASH Erased Ok! Updating Firmware...
> > > > Firmware updated < < < <
Looking for logo.bmp file...
Looking for logo.bmp file...
Power Off >> Unplug USB key >> Power On